When turning the engine with turning gear, you should keep the indicator cocks ().
A、attached to the indicators
B、opened
C、closed
D、broken
A、attached to the indicators
B、opened
C、closed
D、broken
A、A ship has to turn to stem the tide because the wind is strong when she is getting alongside a wharf. B、Sometimes the wind is strong and the current is rough, so a ship has to turn to stem the tide when she is getting alongside a wharf. C、The wind is big, a ship must get alongside a wharf so she has to turn to stem the tide. D、A ship has to turn to stem the tide so she can get alongside a wharf.
A、it is faster B、it can be used in both the immediate action and the delayed action situations C、in fog,if the turn is started as soon as the man goes over,the vessel will be at the point where he went over when the turn is completed D、it returns the vessel to the original track line on a reciprocal course
A、stand clear of the bitts and use two or more round turns under your figure eights B、you can surge the line even with a single turn C、no extra turns are necessary since nylon has a high coefficient of friction D、stand in the bight of the line
A、gained at right angles to the original course B、gained in the direction of the original course C、moved sidewise from the original course when the rudder is first put over D、around the circumference of the turning circle
A、gained at right angles to the original course B、gained in the direction of the original course C、moved sidewise from the original course when the rudder is first put over D、around the circumference of the turning circle
A、water discharges from the indicator cocks B、no water is leaking into crankcase C、no water in the scavenge belt D、the rpm is lower than the speed of Dead Slow Ahead
A、A.turn into the seas B、B.turn to be parallel to the seas C、C.reduce speed D、D.increase speed
A、Clean the heatsink assembly of debris. B、Turn the fan off when the AC adapter is attached. C、Turn the fan to low in the BIOS. D、Replace the processor and fan.