On the network 131.1.123.0/27, what is the last IP address that can be assigned to a host?()
A、131.1.123.30
B、131.1.123.31
C、131.1.123.32
D、131.1.123.33
A、131.1.123.30
B、131.1.123.31
C、131.1.123.32
D、131.1.123.33
A、SegmentA:131.107.40.0/23SegmentB:131.107.42.0/24 SegmentC:131.107.43.0/25 SegmentD:131.107.43.128/27 B、SegmentA:131.107.40.0/25 SegmentB:131.107.40.128/26 SegmentC:131.107.43.192/27 SegmentD:131.107.43.224/30 C、SegmentA:131.107.40.0/23 SegmentB:131.107.41.0/24 SegmentC:131.107.41.128/25 SegmentD:131.107.43.0/27 D、SegmentA:131.107.40.128/23 SegmentB:131.107.43.0/24 SegmentC:131.107.44.0/25 SegmentD:131.107.44.128/27
A、Change the IP address to 131.107.3.254. B、Change the subnet mask to 255.255.248.0. C、Change the default gateway to 131.107.0.1. D、Change the preferred DNS server to 131.107.3.1.
A、Segment A: 131.107.40.0/23 Segment B: 131.107.42.0/24 Segment C: 131.107.43.0/25 Segment D: 131.107.43.128/27 B、Segment A: 131.107.40.0/25 Segment B: 131.107.40.128/26 Segment C: 131.107.43.192/27 Segment D: 131.107.43.224/30 C、Segment A: 131.107.40.0/23 Segment B: 131.107.41.0/24Segment C: 131.107.41.128/25 Segment D: 131.107.43.0/27 D、Segment A: 131.107.40.128/23 Segment B: 131.107.43.0/24Segment C: 131.107.44.0/25 Segment D: 131.107.44.128/27
A、Any routes learned by R2 from the interface tied to the 172.16.0.0 network will not be advertised to neighbors on the 192.168.2.0 network. B、Only routes learned by R2 from the interface tied to the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network. C、Only the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network. D、All networks, except the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network .
A、Configure the IPv6 protocol on the Windows 7 computers. B、Configure the network shares on the Windows 7 computers to include the user names of all employees. C、Configure the network shares on the Windows XP computers to include the user names of all employees. D、Install the Link Layer Topology Discovery (LLTD) Responder on the Windows XP computers.
A、On router R2, configure a default static route to the 192.168.1.0 network. B、On router R2, configure DNS to resolve the URL assigned to Web Server 2 to the 192.168.1.10 address. C、On router R1, configure NAT to translate an address on the 209.165.100.0/24 network to 192.168.1.10. D、On router R1, configure DHCP to assign a registered IP address on the 209.165.100.0/24 network to Web Server 2.
A、the cause of routing errors. B、the number of switches on the network. C、the number of users on the network. D、where network latency will occur.