The()is the intermediate deck between upper deck and the inside bottom of the vessel.
A、forcastle
B、tweendeck
C、hatches
D、peak tanks
A、forcastle
B、tweendeck
C、hatches
D、peak tanks
A、::/0 is the default route, and ::/128 is the unspecified address. B、::/0 is the unicast address, and ::/128 is the anycast address. C、::/0 is the anycast address, and ::/128 is the multicast address. D、::/0 is the unicast address, and ::/12 8 is the multicast address. E、::/0 is the unspecified address, and ::/128 is the multicast address. F、::/0 is the anycast address, and ::/128 is the default address.
A、The sensitivity is the same for the MS and the BTS. B、The path loss is the same for the MS and the BTS. C、The feeder loss is the same for the MS and the BTS. D、The antenna gain is the same for the MS and the BTS. E、The combiner loss is the same for the MS and the BTS.
A、the inlet port is opened by the up coming piston; the port is closed by the down going B、the inlet valve is opened by the down going piston;the inlet valve is closed C、the inlet port is opened by the down going piston;the port is closed by the up coming D、the inlet valve is opened
A、The address is removed from the pool until the conflict is resolved. B、The address remains in the pool until the conflict is resolved. C、Only the IP detected by Gratuitous ARP is removed from the pool. D、Only the IP detected by Ping is removed from the pool. E、The IP will be shown, even after the conflict is resolved.
A、A. The incident metadata is purged when the problem is resolved and the DBA closes the SR B、B.The incident files and dumps are not retained in the ADR for the manually created incidents C、C. The incident files are retained but the incident metadata is purged when the problem is resolved and the DBA closes the SR D、D. The default setting is for one year after which the incident metadata is purged from the ADR and the files are retained for one month
A、the saturation temperature is higher B、the higher the saturation temperature C、the higher is the saturation temperature D、the saturation temperature is more high
A、The index is not used by the optimizer but is maintained during DML operations. B、The index is not used by the optimizer and is not maintained during DML operations. C、The index is used by the optimizer only if a hint is specified in the query statement and is maintained during DML operations. D、The index is used by the optimizer only if a hint is specified in the query statement but is not maintained during DML operations.
A、The hinge on the display panel is damaged. B、The display cable is loose or damaged. C、The display panel is defective. D、The video controller on the system board is defective.
A、The drum is faulty. B、The print buffer is full. C、The printer is out of toner. D、The fuser is faulty.
A、The SSID broadcast is disabled. B、Wireless router is improperly configured. C、The user is connecting to the wrong SSID D、The wireless NIC is defective.