A、数据包将被发送到服务器，因为发送端口是基于服务器的。
B、数据包将被发送到 Switch2 并不会离开该交换机，因为这些数据包仅限于本地。
C、数据包将被发送到笔记本主机。
D、发送到 Router1 的数据包将被丢弃，因为私有地址无法在 Internet 上传输。
E、数据包将被发送到 Router2 并被丢弃，因未与服务器直接连接
更多“ 假设 Router1 没有配置 NAT，会如何处理这些数据包（）<br /> <img src="https://nimg.ppkao.com/2018-07/chenfang/2018072517462683332.jpg?sign=cea62b2c3820d981841149ae064b9063&t=62d5032e" />”相关的问题
A、Split horizon is preventing Router2 from receiving routing information from Router1. B、Router1 is configured for RIP version 2,and Router2 is configured for RIP version 1. C、Router1 has an ACL that is blocking RIP version 2. D、There is a physical connectivity problem between Router1 and Router2. E、Router1 is using authentication and Router2 is not.
A、Router1的将剥离的源MAC地址，并将其与MAC地址0000.0c36.6965取代。 B、Router1的将剥离的源IP地址，并将其与IP地址192.168.40.1取代。 C、router1将剥离的目的MAC地址，并将其与MAC地址代替0000.0c07.4320。 D、router1将剥离的目的IP地址，并将其与192.168.40.1的IP地址替换。 E、Router1的将转发数据包输出接口的FastEthernet0/1。 F、router1将转发数据包输出接口的FastEthernet0/2。
A、头部含有端口号80的帧 B、具有头部和尾部但不含MAC地址的帧 C、具有头部和尾部且只含IP地址的帧 D、源地址为主机1的MAC地址且目的地址为Router1 MAC地址的帧 E、源地址为主机1的MAC地址且目的地址为服务器MAC地址的帧
A、主机E和主机F使用相同的IP网关地址 B、Router1和交换机2应通过交叉线进行连接 C、Router1上不会在主机A和主机D之间的通信中发挥作用 D、在Router1在f0/0接口必须与子接口进行配置 E、Router1上需要更多的LAN接口，以适应显示在展示的VLAN F、在Router1和交换机2的trunk端口f0/0接口必须使用相同的封装类型进行配置
A、Router1 will strip off the source MAC address and replace it with the MAC address 0000.0c36.6965. B、Router1 will strip off the source IP address and replace it with the IP address 192.168.40.1. C、Router1 will strip off the destination MAC address and replace it with the MAC address 0000.0c07.4320. D、Router1 will strip off the destination IP address and replace it with the IP address of 192.168.40.1. E、Router1 will forward the data packet out interface FastEthernet0/1. F、Router1 will forward the data packet out interface FastEthernet0/2.
A、 Router A is the master virtual router， and Router B is the backup virtual router. When Router A fails，  Router B will become the master virtual router. When Router A recovers， Router B will maintain the role of  master virtual router. B、 Router A is the master virtual router， and Router B is the backup virtual router. When Router A fails，  Router B will become the master virtual router. When Router A recovers， it will regain the master virtual  router role. C、 Router B is the master virtual router， and Router A is the backup virtual router. When Router B fails，  Router A will become the master virtual router. When Router B recovers， Router A will maintain the role of  master virtual router. D、 Router B is the master virtual router， and Router A is the backup virtual router. When Router B fails，  Router A will become the master virtual router. When Router B recovers， it will regain the master virtual  router role.
A、查询网络 192.168.0.0/28 的查询数据包 B、到 224.0.0.9 的确认数据包 C、发送到 255.255.255.255 的更新数据包 D、包含 R2 新路由表的数据包 E、发送到 192.168.1.1 和 192.168.2.1 的单播更新数据包
A、Router1 has specific boot system command that instruct it to load IOS from TFTP server. B、Router1 is acting as a TFTP server for other routers. C、Router1 cannot locate a valid IOS image in flash memory. D、Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server. E、Cisco routers will first attempt to load a image from TFTP for management purposes.
A、将出现如下提示：User Access Verification Password： B、Switch2将把目的地不可达的消息返回给Switch1 C、Router1将把目的地不可达的消息返回给Switch1 D、数据包将被丢弃
客服
TOP
查看正确答案
