A、QoS must be set to Platinum
B、WMM must be enabled
C、QoS must be set to Gold
D、TSPEC must be disabled
E、Cisco Compatible Extensions must be disabled
更多“Which two settings must be configured in order to use the GUI to configure Call Admission Control with voice applications?（）”相关的问题
A、A
A、Addresses used for NAT pools should never overlap. B、If more than one rule-set matches traffic, the rule-set with the most specific context takes precedence. C、If traffic matches
A、A. operating mode B、B. auto-deployment C、C. speed and duplex
A、set SHARED_POOL_SIZE to zero B、set STATISTICS_LEVEL to BASIC C、set SGA_TARGET to a non-zero value D、set DB_CACHE_SIZE to a non-zero value E、set STATISTICS_LEVEL to TYPICAL or ALL
A、edit policy-options policy-statement policy-name set term 1 from protocol static set term 1 then accept B、edit ospf policy set from protocol static set 1 then accept C、set protocols OSPF export policy-name D、set protocols OSPF policy policy-name
A、Do-Not-Fragment flag is set. B、Both SYN and FIN flags are set. C、Both ACK and PSH flags are set. D、FIN flag is set and ACK flag is not set.
A、set protocols set ospf area 0 set interface so-0/0/0.100 B、set protocols ospf area 0 interface so-0/0/0.100 C、edit protocols ospf interface so-0/0/0.100 D、edit protocols ospf area 0 set interface so-0/0/0.100
A、set interfaces fe-0/0/0 address 10.1.1.1/24 B、set interfaces fe-0/0/0.0 family inet address 10.1.1.1/24 C、set interfaces fe-0/0/0.0 address 10.1.1.1/24 D、set interfaces fe-0/0/0 unit 0 family inet address 10.1.1.1/24
客服
TOP
查看正确答案
