A、A.Ⅰ + Ⅱ
B、B.Ⅰ ~ Ⅲ
C、C.Ⅰ ~ Ⅳ
D、D.Ⅰ + Ⅱ + Ⅳ
更多“If keep the fuel injection of main engine unchanged when ship is fouled, that will causeⅠ.The speed of main engine to be reduced Ⅱ.Ship speed to be reduced Ⅲ.The resistance torque of propeller to be increased Ⅳ.Trim at stern to increase（）”相关的问题
A、keeping the fuel tanks topped off B、increasing the free surface effect C、keeping the fuel tanks at least half MI D、keeping at least one fuel tank empty for slops
A、a damaged pneumercator line B、a puncture, crack, or hole in the skin of the vessel C、improper record keeping of fuel transfer activities D、contamination of the contaminated steam supply system
A、fuel droplets will burn as they leave the fuel injector B、fuel will not be properly atomized in the cylinder C、maximum expansion of the burned fuel cannot take place in the cylinder D、compression pressure will be too low to cause fuel ignition
A、Move the fuel control mechanism to the no fuel position B、Block the fuel supply by closing the master fuel valve C、Shut off the fuel supply and block the flow of intake air D、Relieve all pressure in the fuel system
A、fuel line connections to cylinder injection valves B、gasket surfaces of the fuel oil filters C、discharge fitting of the fuel injector pumps D、suction side of the fuel oil tran
A、reduce fuel feeding B、increase fuel feeding C、keep original fuel feeding D、be overspeed
A、fuel oil pump will over-speed if dirt is not removed B、fuel oil transfer pumps cannot tolerate small amounts of dirt in the oil C、fuel injectors may be damaged by foreign particles in the fuel oil D、dirty fuel will clog the intake air filter
A、Fuel injection timing will change B、Nozzle operation will be unaffected C、Fuel will leak into the drain line D、Fuel will not be delivered
A、overheated injection pumps B、water condensed in the cylinders C、fuel dilution of the lube oil D、air in the fuel system
A、that the fuel valve is open B、if the air supply system is open C、if the water sprinkler system is open D、if the limit switch is on
客服
TOP
查看正确答案
