When inspecting piston rings through the ports of a two-stroke/cycle diesel engine, black areas on the sealing surfaces are the result of ()
A、insufficient lubrication
B、improper piston cooling
C、blow-by
D、overload operation
A、insufficient lubrication
B、improper piston cooling
C、blow-by
D、overload operation
A、A.when the remaining charge volume is less than 90 percent of the required VOLUME B、B.at each inspection for certification C、C.at each annual inspection D、D.when the weight loss exceeds 10% of weight of charge
A、The propeller hub taper and shaft keyway should be inspected for cracks or corrosion B、The stern bearing alignment with the stern frame should be checked C、The interior of the stern tube should be inspected for leaks D、The shaft liner should be removed and inspected
A、Clean all electrical connections B、Lift the relief valves by hand C、Inspect and clean all solenoid valves D、Inspect for oil and water leaks
A、clean the flame scanner photocell window B、Inspect and clean all solenoid valves C、lift the safety valves by hand D、Inspect for oil or water leaks
A、a vessel is equipped with an automatic smoke or fire detecting system B、the cargo hatches are of steel construction C、the cargo is of a nonflammable type D、there is sufficient fire protection located on the main deck adjacent to the cargo hatch
A、Carry out safety inspection. B、Carry out more detailed inspection. C、Carry out important inspection. D、Carry out relevant inspection.
A、A.yearly inspection B、B.quarterly inspection C、C.monthly inspection D、D.weekly inspection