The needle valve will open when the fuel pressure acting on the needle valve () exerts a sufficient force to overcome the spring compression.
A、tape face
B、tapered face
C、surface
D、thinner face
A、tape face
B、tapered face
C、surface
D、thinner face
A、ensure penetration and distribution of the fuel in the combustion chamber B、ensure the needle valve is flushed clean during each injection C、prevent combustion gas blowback into the open needle valve D、prevent reflected pressure waves when the needle valve closes
A、rack position should be adjusted B、compensating needle valve should be opened fully compensating C、needle valve should be adjusted to stabilize operation D、speed limiting device should be adjusted
A、move in an opening direction B、move in a closing direction C、either open or close D、not move at all
A、pilot valve opening B、compensating needle valve C、compensating spring tension D、accumulator spring tension
A、adjusts the idle speed control B、drain and flushes the governor and replace the oil C、adjusts the compensating needle valve
A、pilot valve oil pressure B、speeder spring force C、compensation needle valve clearance D、centrifugal force on the flyweights