Fuel is not supplied to the corresponding cylinders due to ().
A、a failure of the motor
B、a failure of lubricator
C、a failure of cylinder
D、a failure of fuel pump
A、a failure of the motor
B、a failure of lubricator
C、a failure of cylinder
D、a failure of fuel pump
A、the starting air supply is cut off and fuel is injected into the cylinders B、the fuel feeding is cut off and the turning gear is put in C、the starting air supply is cut off and turning gear is taken out D、the electric blower is shut down and fuel is injected into the cylinders
A、A.air supply is shut off B、B.fuel supply is shut off C、C.water supply is shut off D、D.safety valve lifts
A、increase the fuel oil temperature B、decrease the fuel oil temperature C、decrease the fuel oil supply pressure D、increase the air supply
A、increase the fuel oil temperature B、decrease the fuel oil temperature C、decrease the fuel oil supply pressure D、increase the air supply
A、that the fuel valve is open B、if the air supply system is open C、if the water sprinkler system is open D、if the limit switch is on
A、After stopping supplying sludge oil, the value and pipe should be flushed by flushed by diesel oil and the incinerator continue burning for 10 minutes B、Close auxiliary burner firstly and then close main burner C、After stopping fuel, restoring the position of main fuel supply valve D、Stop blower as soon as stopping supplying fuel oil
A、lag behind the increased fuel supplied to the engine B、enter the engine along with the increase in the fuel C、enter the engine before the increased fuel supply D、leave the turbocharger as a negative pulse