A、erosion and cratering of the nozzle orifices
B、fuel leakage into the nozzle drain line
C、fuel leakage before and after injection
D、insufficient fuel delivery though that nozzle
更多“Dirt lodged on the nozzle valve seat of a fuel injection nozzle will cause（）”相关的问题
A、loss of residual magnetism B、absorption of moisture in the insulation C、insulation varnish flaking D、dirt collecting on the windings
A、loss of residual magnetism B、absorption of moisture in the insulation C、insulation varnish flaking D、dirt collecting on the windings
A、corrosion on the gears B、excessive gear speed C、dirt in the oil D、misalignment of the gears
A、the bearing had been overheated B、water was present in the oil C、the lube oil was not being properly filtered D、the maximum allowable bearing pressure had been exceeded
A、A.dirt will cause corrosion of bearing B、B.bearings will leak oil excessively C、C.dirt is very abrasive when mixed with grease D、D.grease will become inflammable
A、large dirt particles in the oil supply B、insufficient lubricating oil and overheating C、normal wear D、water contamination of the lube oil
A、fuel oil pump will over-speed if dirt is not removed B、fuel oil transfer pumps cannot tolerate small amounts of dirt in the oil C、fuel injectors may be damaged by foreign particles in the fuel oil D、dirty fuel will clog the intake air filter
A、A. The laptop is too far away from the WAP. B、B. The WAP is using 802.11a frequencies. C、C. The laptop is only set to allow 802.11n connections. D、D. The technician is on an 802.11b network.
A、forward spring line and going slow ahead on the inboard engine B、after spring line and going slow astern on the outboard engine C、forward spring line and going slow ahead on both engines D、forward spring line and going slow ahead on the outboard engine
客服
TOP
查看正确答案
