Top and inner graduated borderlines of the chart are().
A、scales of latitude
B、scales of longitude
C、compass rose
D、source data
A、scales of latitude
B、scales of longitude
C、compass rose
D、source data
A、tank top B、compartment between the tank top and shell of the vessel C、inner side of the vessel's shell D、space between two transverse bottom frames
A、tank top B、compartment between the tank top and shell of the vessel C、inner side of the vessel's shell D、space between two transverse bottom franges
A、plating forming the engine room tank top B、doubler plating installed over the flat keel plate C、a watertight boundary formed by the inner bottom D、compartments between the inner and outer bottoms
A、top of the piston and bottom side of head, with the piston at BDC B、piston and head, including the space around the piston to the top of the upper ring and under the valves, with the piston at TDC C、bottom of the piston and bottom side of the head at TDC, regardless of upper ring location and valve placement D、top of the piston and bottom side of the head at TDC as compared to that which exists between the top of the piston and bottom side of head at BDC
A、new Inner(); // At line 3 B、new Inner(); // At line 8 C、new o.Inner(); // At line 8 D、new Outer.Inner(); // At line 8
A、inner bottom plating and longitudinals B、decks and bulkheads C、double bottom girders D、topside and hopper tank sloping plating and longitudinals
A、one meter from the tank bottom and one meter below the tank top B、one half the ullage of the tank and one meter below the tank top C、one half the ullage of the tank and one meter above the tank bottom D、at three meter intervals from the tank top to the bottom
A、one meter from the tank bottom and one meter below the tank top B、one half the ullage of the tank and one meter below the tank top C、one half the ullage of the tank and one meter above the tank bottom D、at three meter intervals from the tank top
A、one meter from the tank bottom and one meter below the tank top B、one half the ullage of the tank and one meter below the tank top C、one half the ullage of the tank and one meter above the tank bottom D、at three meter intervals from the tank top