A、open the filter and inspect the elements
B、check the lube oil pump discharge pressure
C、check the lube oil header pressure
D、check the pressure drop across the filter
更多“To determine if the lube oil filter elements need changing, （）.”相关的问题
A、To help the technician learn how to perform the task B、To determine if the user is performing the task properly C、To determine if the user is authorized to perform the task D、To help the technician determine if there is a better way to perform the task in question
A、Determine if CIFS acceleration is enabled. B、Determine if TCP Acceleration (AFP) is enabled. C、Determine if Forward Error Correction is enabled. D、Determine if any tunnel bounces occurred recently. E、Determine whether both Exchange server and clients are running version 2003.
A、Open the bilge pump for inspection B、Remove each of the manifold valves C、Remove only the manifold valve to the affected bilge-well D、Attempt to pump out another bilge well to determine if the entire system is affected
A、to determine the pseudonode ID B、to determine the next hop to a given destination C、to determine the complete path to a given destination D、to determine the number of routers present in a given area
A、Power cycle the VPN concentrator at the office. B、Determine if the VPN service is running at the office. C、Reinstall the VPN client at the remote computer. D、Determine if the user has the correct VPN address and password.
A、Only a radar expert can determine if the radar is operating B、All radars have indicator lights and alarms to signal improper operation C、A radar range compared to the actual range of a known object can be used to check the operation of the radar D、The radar resolution detector must be energized to check the radar
A、to determine if there are more clients that are using the multicast stream B、to limit the time that a client has to request an IGMP join to the controller multicast group C、to determine if the multicast router is still alive and responding to multicast clients D、to remove clients from the multicast group if the multicast traffic exceeds the allotted bandwidth allowed for multicast clients
A、The name?command.The ?name?command. B、The ptime?command.The ?ptime?command. C、The hutdown ast?command.The ?hutdown ?ast?command. D、The ?etc/rc.shutdown?command.
A、Use ’prtconf -c’ to see if the system is 64-bit enabled B、Check the /etc/inittab to see if /etc/method/cfg64 is enabled C、Use the ls -al to see if /unix is linked to /usr/lib/boot/unix_64 D、Use the lslpp command to see if the bos.mp64 fileset is installed
客服
TOP
查看正确答案
