On inflatable liferafts,the operating cord should be renewed by().
A、cutting the old line off and renewing same
B、an approved servicing facility ashore
C、opening the case and replacing the entire line
D、one of the ship's officers
A、cutting the old line off and renewing same
B、an approved servicing facility ashore
C、opening the case and replacing the entire line
D、one of the ship's officers
A、Pull on the hydrostatic release,pull on the sea painter B、Push on the hydrostatic release,pull on the sea painter C、Push on the hydrostatic release,push on the sea painter D、Pull on the hydrostatic release,push on the sea painter
A、pushing up on one side B、standing on the CO2 bottle,holding the bottom straps,and throwing your weight backwards C、getting at least three or four men to push down on the side containing the CO2 cylinder D、doing nothing; it will right itself after the canopy supports inflate
A、filling the stabilizers on one side with water B、releasing the CO2 cylinder C、pushing up from under one end D、standing on the inflating cylinder and pulling on the straps on the underside of the raft
A、A.by turning the globe clockwise B、B.by a switch at each light C、C.by a light sensor D、D.automatically when the raft is inflated
A、the float-free method ONLY B、breaking the weak link on the painter C、throwing the entire container overboard and then pulling on the operating cord to inflate the raft D、removing the securing straps
A、救生衣充气!下水!(无救生筏)Inflate!Go! B、救生衣充气!上筏!Inflate!On board! C、脱下鞋子!No shoes! D、爬行!分散坐下!不要站立!Crawl! Sit down!
A、A.automatically as the liferaft inflates B、B.with a switch near the boarding handle C、C.at night because the light has a photosensitive switch D、D.by screwing the bulb in after the raft is inflated
A、A.the float-free method ONLY B、B.breaking the weak link on the painter C、C.throwing the entire container overboard and then pulling on the operating cord to inflate the raft D、D.removing the securing straps
A、open the CO2 inflation valve B、open the raft container C、ensure that the operating cord is secured to the vessel D、inflate the raft on the vessel,then lower it over the side
A、Open the liferaft casing B、Turn the valve on the CO2 cylinder to start inflation C、Make sure the operating cord is secured to the vessel before throwing it over the side D、After inflation,detach operating cord from liferaft