【问答题】
查看正确答案A、R1（config-route-at）# B、R1（config-route-map）# C、R1（config-it）# D、R1（config-vrf）# E、R1（config）# F、R1（router）#
搜题
更多“r1 is the hub ， multipoint mode subinterface， r2 and r3 is spoke， when r2 down at the spoke， What will r1 react？how about r3？”相关的问题
第2题
A、R1（config）# interface ethernet 0；R1（config-if）# ip address 192.1.1.129 255.255.255.192；R1（config-if）# no shutdown B、R1（config）# interface ethernet 0；R1（config-if）# ip address 192.1.1.97 255.255.255.192；R1（config-if）# no shutdown C、R1（config）# interface serial 0；R1（config-if）# ip address 192.1.1.4 255.255.255.252；R1（config-if）# clock rate 56000 D、R1（config）# interface serial 0；R1（config-if）# ip address 192.1.1.6 255.255.255.252；R1（config-if）# no shutdown E、R1（config）# router rip；R1（config-router）# network 192.1.1.4；R1（config-router）# network 192.1.1.128 F、R1（config）# router rip；R1（config-router）# version 2；R1（config-router）# network 192.1.1.0
第3题
A、If OSPF is the routing protocol， the path will be from R1 to R3 to R4 to R5. B、If OSPF is the routing protocol， the path will be from R1 to R2 to R5. C、If OSPF is the routing protocol， the path will be from R1 to R5. D、If RIPv2 is the routing protocol， the path will be from R1 to R3 to R4 to R5. E、If RIPv2 is the routing protocol， the path will be from R1 to R5.
第4题
A、Traffic forwarded from R2 to or through R1 will continue to be forwarded based on the forwarding table state at the time of the reload. B、R2 will continue to forward traffic to R1， but R1 will drop the traffic because its neighbor adjacency with R2 has failed. C、R2 will continue forwarding traffic to and through R1， but R1 will drop this traffic because it is not capable of maintaining its forwarding state. D、All the traffic R2 is forwarding to or through R1 will be dropped while OSPF rebuilds its neighbor adjacency and forwarding tables.
第8题
A、Federated Organization Identifier B、Microsoft Federation Gateway C、Application Identifier D、Federation Trust
