A、remove the discharge ring
B、re-prime the purifier
C、the centrifuge to its proper speed
D、install an additional discharge ring
更多“If fuel oil were being discharged from the waster outlet of a fuel oil disk type centrifuge, operated as separator, you should（）”相关的问题
A、fuel oil pump will over-speed if dirt is not removed B、fuel oil transfer pumps cannot tolerate small amounts of dirt in the oil C、fuel injectors may be damaged by foreign particles in the fuel oil D、dirty fuel will clog the intake air filter
A、A.fuel oil pump will over-speed if dirt is not removed B、B.fuel oil transfer pumps cannot tolerate small amounts of grit in the oil C、C.fuel injectors may be damaged by foreign particles in the fuel oil dirty D、D.fuel will clog the intake air filter
A、A.close the static leg filling valve B、B.close the overflow tank falling valve C、C.reduce the fuel oil pumping rate D、D.stop the fuel oil pumping operation
A、fuel line connections to cylinder injection valves B、gasket surfaces of the fuel oil filters C、discharge fitting of the fuel injector pumps D、suction side of the fuel oil tran
A、to fuel oil instead of diesel oil B、for fuel oil instead of diesel oil C、to diesel oil into fuel oil D、for diesel oil into fuel oil
A、A.diesel oil instead of fuel oil B、B.fuel oil instead of diesel oil C、C.diesel oil instead fuel oil D、D.fuel oil instead diesel oil
A、filter to remove the fuel oil B、use the settler to remove the fuel oil C、remove the fuel oil by centrifuging D、drain and then renew the lube oil supply
A、A.Fuel oil service pump discharge B、B.Fuel oil strainer C、C.Fuel oil heater D、D.Fuel oil flow meter
客服
TOP
查看正确答案
