A、before correcting for any deviation
B、after correcting for variation
C、after adjusting the fore-and-aft and athwartships permanent magnets
D、before the quadrantal correctors are placed on the compass
更多“When adjusting a magnetic compass for error，a deviation table should be made（）.”相关的问题
A、refrigerant must be bled off the sensing line before adjustments are made B、all refrigerant must be pumped into the receiver before adjustments are made C、time must be allowed for conditions to stabilize in the evaporator before further adjustments are made D、all refrigerant must be routed through the dehydrator while changing the superheat setting
A、Non-follow-up B、Rudder adjustment C、Weather adjustment D、All the above may be activated
A、The cluster VIP is defined on the MAG4610 cluster, and the VIP of the cluster is defined as an instance on the SRX Series device. B、The cluster VIP is not defined on the MAG4610 cluster, and the IP address of both the active and passive nodes of the cluster are defined as separate instances on the SRX Series device. C、The cluster VIP is defined on the MAG4610 cluster, and the IP address of the active node is defined as an instance on the SRX Series device. D、The cluster VIP is not defined on the MAG4610 cluster, and the IP address of the passive node is defined as an instance on the SRX Series device.
客服
TOP
查看正确答案
