A、excessively late injection timing for each cylinder
B、incorrectly adjusted intake valve timing
C、incorrectly adjusted fuel injector
D、incorrectly adjusted intake valve clearance
更多“If a single cylinder relief valve on a diesel engine lists frequently while the engine is running, the cause may be an （）”相关的问题
A、Increase the cooling water flow to the engine B、Secure or reduce fuel to that cylinder C、Screw down on the pressure adjusting spring to decrease to decrease popping pressure D、Readjust the injection timing
A、liquid in the cylinder B、low compression in the cylinder C、high exhaust temperature D、poor fuel penetration
A、a cracked cylinder head B、a leaky cylinder head gasket C、a cracked cylinder liner D、any of the above
A、to inspect if the cylinder has the water leakage B、to expel out the residual water/gas/oil from the cylinder C、to check if fuel supply is normal D、A and B
A、fuel pump should be removed and all connections blanked off B、cylinder oil feed rate should be increased slightly above that used at normal sea speed C、cylinder oil feed rate should be reduced D、cylinder oil feed rate should be increased to the maximum flow capable of the metering pump
A、low exhaust back pressure B、early fuel injection in one of the cylinders C、compression pressure in one of the cylinders D、plugged injector holes
A、direction of air flow within the cylinder B、sequence of port opening C、method of opening exhaust ports D、volume of air admitted to the cylinder
A、Go ahead on both engines with the rudder hard to one side，if on a twin-screw vessel B、Back down with the rudder hard to one side，if on a single-screw vessel C、Take advantage of the tendency to back to port，if on a twin-screw vessel D、Turn so that the tendency to back into the wind can be used，if on a single-screw vessel
客服
TOP
查看正确答案
