The series of valves used to control the return flow in well control operations is called the().
A、valve assembly
B、standpipe manifold
C、accumulator manifold
D、choke manifold
A、valve assembly
B、standpipe manifold
C、accumulator manifold
D、choke manifold
A、with the axis of the solenoid horizontal, sensing temperature of the box, and upstream of the thermal expansion valve B、upright, sensing temperature of the box, and upstream of the thermal expansion valve C、upright, sensing temperature of the box, and downstream of the thermal expansion valve D、upright, sensing heat of the tail coil, and upstream of the thermal expansion valve
A、clearance between the top of the valve stem and the rocker arm B、compression of the valve springs C、clearance between the valve seat inserts and the head D、out of roundness of the fuel injection cams
A、The profile of the valve is like a globe B、The valve seat is set into the bulbous body C、The plug or disc of the valve is made vertical to the axis of the pipe D、The valve seat is located at right side of the plug or disc
A、The condenser and the expansion valve B、The king valve and the solenoid valve C、The compressor and the expansion valve D、The condenser and the solenoid valve
A、the beveled edges of the intake valves provide for serf-centering during seating B、intake valves utilize stellite-coated valve seat inserts which reduce wear C、the volume of air passing through intake valves is less than the volume of air passing through exhaust valves D、intake valves are less affected to the corrosive action of exhaust gases
A、the direct acting relief valve is used for controlling lower flows and pressure B、the pilot operated relief valve is used for controlling higher flows and pressure C、the pilot operated relief valve is used for controlling lower flows and pressure D、the controlling accuracy of direct acting relief valve is worse than that of the pilot operated relief valve
A、The globe valve may be suitable for partially open operation B、The globe valve will give full bore flow with change of direction C、The gate valve gives full bore flow with change of direction D、The gate valve is suitable for full bore operation only
A、capacitor in series with the load B、inductor in series with the load C、capacitor and inductor in series with the load D、resistor in series with the load
A、Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device defined in each configuration. B、A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series devices defined in the configuration. C、Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device defined in each configuration. D、A single Infranet enforcer instance is created with the VIP of the clustered SRX Series device defined in the configuration.