The boat command that means complete the stroke and level the oars horizontally with the blades trimmed fore and aft is().
A、Oars
B、Up oars
C、Way enough
D、Hold water
A、Oars
B、Up oars
C、Way enough
D、Hold water
A、complete the stroke,hold your oar out from the boat and level with the water B、dip the blade of your oar into the water and leave it there C、lift your oar to a vertical position D、complete the stroke,raise your oar slightly,swing it forward,and place it in the boat
A、the forward boat on the starboard side B、behind boat number 1 on the port side C、behind boat number 1 on the starboard side D、behind boat number 2 on the port side
A、before the boat is lowered from the stowed position B、as the boat-fall blocks break clear of the davit head C、before the boat is lowered from the embarkation level D、after the boat is released into the water
A、before the boat is lowered from the stowed position B、as the boat fall blocks break clear of the davit head C、before the boat is lowered from the embarkation level D、after the boat is released into the water
A、before the boat is lowered from the stowed position B、as the boat fall blocks break clear of the davit head C、before the boat is lowered from the embarkation level D、after the boat is released into the water
A、the painter B、the after boat fall only if the boat is waterborne C、both falls at the same time only if the boat is waterborne D、both falls at the same time even if the boat has not reached the water
A、it is not a valid NetFlow command. B、it is an SNMP command tha texports1500-byte packets to IPaddress192.168.1.50. C、it is a NetFlov/command that v/ill export 1500-byte packets to IP address192.168.1.50. D、it is a NetFlov/command that allows IP address192.168.1.50 to send traffic to port 1500. E、It is a NetFlov/command that v/ill specify that the NetFlov/collector’s IP address is 192.168.1.50 over UDP port 1500