A、A.acted
B、B.activated
C、C.actioned
D、D.enactioned
更多“The first the Second Mate knew of the fire was the sounding of the emergency alarm，which had been（）from the engine room.”相关的问题
A、Gravity siphon effect B、Higher vacuum in the second-stage C、Difference in brine density between first and second stages D、lower pressure in first-stage
A、taken up through the eye of the first line B、taken up over the eye of the first line C、made fast to the first line D、taken up from the eye of the first line
A、If the first stand-by set failed B、If the first stand-by set fails C、If the first stand-by set will fail D、If the first stand-by set doesn’t fail
A、Put one line at the low point and one at the high point of the bollard so they don't touch B、Take the eye of the second line up through the eye of the first line before putting the second line on the bollard C、Never put two mooring lines on the same bollard D、The mooring line forward should be put on the bollard first
A、A.first stage flash chamber B、B.second stage flash chamber C、C.first stage after condenser D、D.second stage distilling condenser
A、Restart both servers at the same time so the servers are down at the same time. B、DC server first, then the Exchange server second. C、The order in which the servers are restarted does not matter. D、Exchange server first, then the DC server second.
A、deaerate the first effect distillate B、filter the condensed flash vapors C、deaerate the first and second effect distillate D、remove small water droplets entrained in the flashed vapor
A、A.first and third U-bolts on the bitter end and the second U-bolt on the standing part B、B.first and third U-bolts on the standing part and the second U-bolt on the bitter end C、C.U-bolts of all clips on the bitter end D、D.U-bolts of all clips on the standing part
A、The first line at the bottom B、The second line from the bottom C、The third line from the bottom D、The fourth line from the bottom
A、The second hard drive has not been formatted for NTFS. B、The jumpers on both drives are set to the cable select position. C、The jumper on the first drive is set to master and the second is set to slave. D、The jumpers on both drives are set to the master position.
客服
TOP
查看正确答案
