In determining the scope of anchor line to pay out when anchoring a small boat,one must consider the().
A、charted depth of water only
B、depth of water,including tidal differences
C、time and date of anchoring
D、type of anchor being used
A、charted depth of water only
B、depth of water,including tidal differences
C、time and date of anchoring
D、type of anchor being used
A、Whether or not all of the vessel's control equipment is in working order B、The vessel's draft in relation to the available depth of water C、Whether the nature of the vessel's work limits maneuverability required by the Rules D、Whether or not the vessel is the give-way vessel in a meeting situation
A、align the vessel's tailshaft B、determine the vessel's trim C、determine the vessel's freeboard D、locate the vessel's centerline
A、to determine the pseudonode ID B、to determine the next hop to a given destination C、to determine the complete path to a given destination D、to determine the number of routers present in a given area
A、innage B、thievage C、ullage D、the tank's datum point
A、innage B、thievage C、ullage D、the tank's datum point
A、A.shape of the anchor B、B.stowage of the anchor on board C、C.anchor's ability to dig in D、D.size of the vessel and its draft
A、Each fiber has half of its SONET capacity reserved for protection. B、Two fibers in the span carry working traffic, while the other two fibers in the span are reserved for protection. C、The signal is sent simultaneously in both directions around the ring. The receiver determines which fiber to listen to based on signal quality. D、The signal is sent simultaneously in both directions around the ring. The transmitter determines which fiber has the working bit set for the receiver to acknowledge.
A、A. It is used with the OSPF priority values to determine which OSPF router will become the DR or BOR in a point-to-point network B、B. It is used with the OSPF priority values to determine which interface will be used to form a neighbor relationship with another OSPF router C、C. It is used with the OSPF priority values to determine which router will become the DR or BOR in a multi access network D、D. It is used to determine which interfaces will send Hello packets to neighboring OSPF routers
A、Forecastle deck is located in the ship’s stern. B、Poop deck is located in the ship’s bow. C、Forecastle deck is located in the ship’s bow. D、Poop deck is located in the ship’s stern.
A、carotid artery in the neck B、femoral artery in the groin C、brachial artery in the arm D、radial artery in the wrist