A、small plate which fills the aperture between riveted strakes and the vessel framing
B、backing plate which is used to level the strakes while riveting，and then removed
C、internal frame to which the side shell is riveted
D、seam that is welded after riveting is completed
更多“A “liner” in riveted construction of a vessel is a(n)（）.”相关的问题
A、small plate which fills the aperture between riveted strakes and the vessel framing B、backing plate which is used to level the strakes while riveting，and then removed C、internal frame to which the side shell is riveted D、seam that is welded after riveting is completed
A、A.small plate which fills the aperture between riveted strakes and the vessel framing B、B.backing plate which is used to level the strakes while riveting，and then removed C、C.internal frame to which the side shell is riveted D、D.seam that is welded after riveting is completed
A、Tearing through the member is more likely in this type connection B、The weld may be broken by the stresses caused by riveting C、The weld increases the tensile stress on the rivet heads D、The welding must be completed before the riveting commences
A、raised flange at the main deck edge B、riveted crack arrester strap on all-welded ships C、riveting pattern most commonly used in ship construction D、row of plating nearest the keel
A、Excessive cylinder liner B、water in the fuel system C、Cracked cylinder liner D、Leaking lube oil cooler
A、A.Liner wear is distributed equally between the upper and lower portions of the cylinder B、B.Excessive liner wear causes wear between piston ring and groove C、C.Excessive, but uniform liner wear will not cause wear between piston ring and groove D、D.Liner wear is normally greatest in the middle of the cylinder
客服
TOP
查看正确答案
