The term BOLLARD PULL refers to a towing vessel’s().
A、propulsion horsepower available
B、pulling ability at cruise power
C、towing winch capability
D、pulling ability under static conditions
A、propulsion horsepower available
B、pulling ability at cruise power
C、towing winch capability
D、pulling ability under static conditions
A、Put one line at the low point and one at the high point of the bollard so they don't touch B、Take the eye of the second line up through the eye of the first line before putting the second line on the bollard C、Never put two mooring lines on the same bollard D、The mooring line forward should be put on the bollard first
A、Place the eye from the forward line on the bollard and then place the eye from the second line directly over the first B、It makes no difference how the lines are placed C、Place the eye from either line on the bollard,and then bring the eye of the other line up through the eye of the first,and place it on the bollard D、Place both eyes on the bollard,in any manner,but lead both lines to the same winch head on the vessel and secure them on the winch
A、set term match from policy reject B、up 1 copy policy-statement my-policy term match to term before-reject C、activate term match to policy D、insert term match before term reject
A、the eye of the second line is dipped B、the mooring lines are doubled C、the bollard has two horns D、one of the lines is a breast line
A、taken up through the eye of the first line B、taken up over the eye of the first line C、made fast to the first line D、taken up from the eye of the first line
A、Multiple action modifiers can be included in the same term. B、Only a single action modifier can be included in the same term. C、The default term within a firewall filter uses the discard action. D、The default term within a firewall filter uses the reject action.
A、Traffic matching the my-policy term will be counted and accepted. B、Traffic matching the my-policy term will be counted and discarded. C、Traffic not matching the my-policy term will be discarded. D、Traffic not matching the my-policy term will be accepted.
A、In the absence of a terminating action, all routes are accepted. B、The route will be evaluated by the second term in the policy. C、The default action will be applied. D、In the absence of a termination action, all routes are rejected.
A、A single term can be applied to a protocol or interface, independent of the policy B、Every policy must contain at least one term C、The name of a term is limited to five characters D、Terms are optional