Cooling of engine is achieved by circulation a cooling liquid around internal passages within the ().
A、boiler
B、heater
C、engine
D、cooler
A、boiler
B、heater
C、engine
D、cooler
A、Each engine must have its own engine driven cooling water pump capable of providing cooling for all ranges of operation B、propulsion engines with bores exceeding 200 mm are to be fitted with a means to display the cooling water temperature of each cylinder C、At least two independent sea suctions are to be provided for supplying water to the engine jackets or to the heat exchangers D、Suitable strain are to be fitted between the circulating pumps and heat exchangers when sea water is used for direct cooling
A、discharge side of the centrifugal pump B、suction side of the centrifugal pump C、the lowest point of the cooling water system D、inlet of the main engine
A、Cooling water is alkalescence B、cooling water is acidity C、cooling water has salinity D、cooling water has impurity
A、A.notify the duty officer, reduce the engine speed, take some measures to remove failures B、B.notify the duty officer and stop the engine immediately, find the cause and remove failures C、C.notify the C/E D、D.notify the captain
A、air binding of the engine cooling system B、a cracked water cooled exhaust manifold C、blockage in the heat exchanger D、faulty operation of the thermostat
A、reduce lube oil temperature B、raise exhaust temperature reduce C、excessive heating of engine room D、reduce load on cooling water pump
A、An alarm device with audible and visible signals is required for all cooling water systems B、Propulsion engines with bores over 200 mm are to be fitted with cooling water jackets C、Each totally enclosed cooling system shall be provided with a suitable head tank D、Drain cocks are to be provided at the lowest points of all cylinder water jackets
A、A.cooling water of the cooling system B、B.fuel of the FO system C、C.LO of the LO system D、D.cooling water of the cooling system and LO of the LO system